Biodiversity Net Gain (BNG) Assessment

What is a Biodiversity Net Gain assessment?

A Biodiversity Net Gain assessment establishes a site's pre-development biodiversity value, calculates the expected post-development value and identifies the habitat creation, enhancement or off-site measures required to achieve the target net gain.

Biodiversity Net Gain is a statutory requirement, mandatory for almost all construction and change-of-use development projects. Developments must deliver a BNG of 10%, resulting in more or better quality natural habitat than there was before development.

Request a free, no-obligation BNG assessment quote

BNG assessment: key facts at a glance

Minimum target
At least 10% biodiversity net gain
Typical projects
Almost all construction and change-of-use development projects
Calculation method
The latest Statutory Biodiversity Metric
Professional input
A qualified ecologist, particularly for major developments
Long-term commitment
Created or enhanced habitats must be managed for at least 30 years
Typical survey window
April to October where only one survey window is available; additional seasonal visits may be needed
Orange and brown butterfly feeding on purple flowers, illustrating biodiversity and habitat quality.
Biodiversity Net Gain aims to leave habitats in a measurably better condition after development.

Why Biodiversity Net Gain is required

Biodiversity loss is driven by habitat destruction, pollution, intensive land use, resource exploitation and greenhouse gas emissions. BNG places measurable habitat protection, creation and enhancement within the planning process so that development contributes to ecological recovery rather than simply replacing lost habitat.

Local planning authorities use BNG requirements when assessing planning applications. Developers must follow the biodiversity gain hierarchy: first avoid harm, then reduce or mitigate it, prioritise on-site habitat measures, consider off-site gains where necessary and use statutory credits only as a last resort.

What a BNG assessment report includes

Every site is different, but a Biodiversity Net Gain assessment will typically include:

  • A site examination and relevant ecological surveys.
  • A review and map of existing habitats, habitat parcels and linear habitats.
  • An assessment of species, habitat condition, ecological communities and ecosystem characteristics.
  • Calculation of the baseline biodiversity value and baseline biodiversity units.
  • Calculation of the expected post-development biodiversity units using the latest Statutory Biodiversity Metric.
  • Identification of habitat creation, enhancement, landscaping and management measures.
  • Independent, science-based recommendations to support planning compliance, due diligence and reliable decision-making.
Download the detailed mandatory BNG information sheet Step-by-step guidance, site-size thresholds and exemptions

How the Biodiversity Net Gain calculation works

  1. Establish the pre-development baseline

    Survey the site and, where appropriate, its surroundings. Map distinct habitat areas and identify each on-site habitat parcel, often alongside a Preliminary Ecological Appraisal.

  2. Assess habitat condition and constraints

    Evaluate each habitat area against habitat-specific criteria, including species richness and other metric measures. Identify irreplaceable habitats and protected sites early because they can affect design and assessment choices.

  3. Calculate baseline biodiversity units

    Convert the habitat data into a numerical biodiversity-unit score. This establishes the baseline value against which the post-development proposal is compared.

  4. Model the post-development habitats

    Calculate the value of retained, created or enhanced habitats and define the condition targets that must be achieved and maintained.

  5. Compare the scores and identify the gap

    Compare the pre-development and post-development scores. The difference shows whether the proposal achieves the required net gain and whether further habitat measures or biodiversity units are needed.

  6. Set out long-term management

    Habitat enhancements must be managed, monitored and legally maintained for at least 30 years. The management approach should be documented in the biodiversity gain plan.

Important: The Statutory Biodiversity Metric is mandatory and should be completed by a qualified ecologist for all developments. Eligible minor schemes may use the small sites metric.

On-site gains, off-site units and statutory credits

On-site habitat conservation, creation and enhancement should be prioritised. Where the required gain cannot be achieved within the development site, off-site biodiversity units may be used to cover the shortfall. This can include enhancement of other land, contributions aligned with local nature recovery strategies or units supplied by a habitat bank or land manager.

Off-site gain sites may be entered on the biodiversity gain site register through a legal agreement. Statutory biodiversity credits should be considered only as a last resort. Land already owned by the applicant may also be registered and managed as a Biodiversity Gain Site to offset losses from nearby development, subject to the relevant requirements.

Search the official biodiversity gain sites register (opens gov.uk in a new tab)

The biodiversity gain plan

When planning permission is granted, a biodiversity gain plan must be submitted before the development begins. The plan should describe the proposed habitat creation and ecological enhancements, long-term management objectives, maintenance requirements, monitoring arrangements and the measures used to achieve the target net gain.

Where a Local Nature Recovery Strategy (LNRS) has been published, it should inform the assessment and landscape design and should be considered alongside the relevant local habitat map.

Seasonal limitations and survey timing

Adequate investigations can often be undertaken between April and October when only one survey window is available in the project programme. Ideally, however, visits should take place across the seasons. A first inspection may identify the need for additional visits where the available data are not sufficient for a reliable assessment.

How much does a BNG assessment cost?

The cost of a Biodiversity Net Gain assessment varies according to the size and complexity of the site, the habitats present, the surveys required and the level of planning support needed. The appropriate scope should be agreed at the outset so that the assessment provides the evidence required for a successful planning outcome.

Ask for a fast, all-inclusive quote

Why choose us for a Biodiversity Net Gain assessment?

  • More than 30 years of ecological experience.
  • All-inclusive, competitive pricing.
  • Support for both large and small development projects.
  • Fast, no-obligation quotations.
  • Experience on nationally significant infrastructure projects, including telecommunications infrastructure and major hospital and academy redevelopments.
  • Independent, science-based advice focused on planning compliance and practical delivery.

Frequently asked questions about Biodiversity Net Gain

What does BNG stand for?

BNG stands for Biodiversity Net Gain. It is an approach to development that requires habitats to be left in a measurably better state than they were before development.

Is Biodiversity Net Gain mandatory?

Yes. Biodiversity Net Gain has been mandatory from February 2024 for almost all construction and change-of-use development projects, with a minimum target of 10% net gain.

What is the Statutory Biodiversity Metric?

The Statutory Biodiversity Metric is the standard tool used to calculate biodiversity units before and after development. It converts habitat type, area, condition and related factors into measurable unit values.

Who should complete a BNG assessment?

A suitably qualified ecologist should complete the assessment and metric calculation. For major developments, the Statutory Biodiversity Metric should be completed by a qualified ecologist.

Can a development use off-site biodiversity units?

Yes. Off-site units can be used when the required gain cannot be achieved on-site. On-site measures should be prioritised, with statutory credits reserved as a last resort.

How long must BNG habitats be maintained?

Created and enhanced habitats must be managed and legally maintained for at least 30 years.

When can ecological surveys be carried out?

Many investigations can be undertaken between April and October, but the appropriate timing depends on the habitats, species and evidence required. Further seasonal surveys may be recommended.

What affects the cost of a BNG assessment?

Cost depends on the site's size, complexity, habitats, survey requirements, metric work and the planning support required. A site-specific quote provides the most reliable figure.

Key BNG terminology

Baseline biodiversity value
The biodiversity value of the site before development, expressed through biodiversity units.
Biodiversity unit
A standardised numerical value used by the metric to compare habitat value before and after development.
Habitat parcel
A mapped area of a particular habitat type assessed separately within the metric.
Biodiversity gain hierarchy
The order of approach: avoid harm, reduce harm, mitigate on-site, use off-site gains if necessary and use statutory credits only as a last resort.
Biodiversity gain plan
The document explaining how the development will achieve and maintain the required net gain.
Local Nature Recovery Strategy (LNRS)
A local strategy that can guide habitat priorities, assessment and landscape design.
Biodiversity gain site register
The official register used for qualifying off-site biodiversity gain sites.

Need a Biodiversity Net Gain assessment?

Request your free quote today